HH-411 Leeb Portable
Hardness Tester for Metal Workpieces (AI)
Portable
ASTM A956-Compliant Testing with Memory Storage, Angle Compensation, and OK/NG Evaluation (AI)
The “HARDMATIC” HH–411 is a light-weight portable hardness testing instrument for metal workpieces. It works on the rebound hardness principle (standardized according to ASTM A 956). Measurement is conducted with hardness value L (Leeb-value), however, conversion to any desired hardness scale can be performed. In addition, the display automatically shows OK/NG with the tolerance function set and selected. Memory function for 1800 measured values. Automatic measuring direction angle-compensation of the given angle.
Features (used AI)
- Portable, lightweight hardness tester for metal workpieces
- Uses rebound (Leeb) hardness method per ASTM A956
- Converts results to multiple hardness scales
- Built-in OK/NG tolerance evaluation
- Stores up to 1,800 measurements
- Automatic angle compensation for accurate readings
Related Products
TechCut 5x™
This equipment features a large, LED illuminated cutting compartment with an automatic, adjustable rate linear feed (y-axis) table. Two (2) table options provide versatility for a wide variety of applications and needs.
TechCut 5x™
This equipment features a large, LED illuminated cutting compartment with an automatic, adjustable rate linear feed (y-axis) table. Two (2) table options provide versatility for a wide variety of applications and needs.
Related Products
TechCut 5x™
This equipment features a large, LED illuminated cutting compartment with an automatic, adjustable rate linear feed (y-axis) table. Two (2) table options provide versatility for a wide variety of applications and needs.
TechCut 5x™
This equipment features a large, LED illuminated cutting compartment with an automatic, adjustable rate linear feed (y-axis) table. Two (2) table options provide versatility for a wide variety of applications and needs.
Details ?
Quick Slide Vice – can be positioned anywhere along the T-slots, and allow samples up to 3″ (76 mm) deep to be secured.
Chamber Cleaning – simply adjust the valve to redirect coolant from the blade to the cleaning hose.
Vertical Adjusting Clamp – can be positioned in any orientation throughout the T-slots in the tables.