TechCut 4x™
Overview
Precision Low Speed Saw
The TechCut 4x™ is a precision low speed saw designed to cut small or delicate samples that cannot tolerate increased heat from friction caused by high speed sectioning. A 3.5″ color LCD touchscreen is used to control all functions with an intuitive interface optimized for efficiency. The pivoting cutting arm has adjustable weights to apply or counterbalance downward force to the sample during sectioning. Cutting fluid is drawn from the reservoir by the blade to cool the sample. With a 3″ to 6″ blade range, samples up to 2″ thick can be sectioned.
Features
- Gravity-fed saw for smaller, delicate samples
- Accepts 3−6″ (76−150 mm) diameter blades
- Cutting capacity: 2″ (51 mm) thickness
- Color LCD touchscreen to control all functions
- Variable speed: 10−500 RPM, with 5 adjustable presets
- Micrometer sample indexing with 2 μm resolution
- Spring-retractable dressing stick attachment
- Optical shut-off sensor with adjustable stop
Video
Related Products
Deli-Cut Low Speed Cutting Fluid
Cutting fluids enhance blade performance, extend blade life and minimize material deformation by reducing heat during sectioning. Use Deli-Cut low speed cutting fluid for gravity-fed saws at full strength.
Learn More >
Diamond Bonded Wafering Blade
Diamond Metal Bond: High Concentration (HC) – Recommended for general laboratory sectioning, excluding ferrous alloys. Most commonly used at higher (>1,000 RPM) speeds.
Learn More >
Details
Fixtures are adjustable to optimize the cutting angle.
Optical shut-off sensor with adjustable stop.
Spring-retractable dressing stick attachment allows dressing while sectioning.